Buildroot for Nitrogen6 (i.MX6) SBC and SOM We’ve published a “Getting Started” guide to help you get started with Buildroot: Buildroot Getting Started Guide Here is our latest Buildroot release: Buildroot v2017.08 for i.MX platforms We’ve also…
Debian for Nitrogen6
Debian for Nitrogen6 (i.MX6) SBC and SOM Here is the latest available Debian release for i.MX6 platforms: Debian 9.2 Stretch for i.MX6/7 boards – October 2017 (kernel 4.1.15/4.9.x) As a generic resource, you can review the Debian Wiki…
Demos
This page lists most of our demo videos that showcase how our platforms can be used. Qt5 app framework Android & Qt5 demo on Nitrogen8M Qt for device creation Qt5.5 Computer Vision demo on Nitrogen6x Crank StoryBoard Crank software demo…
Getting Started
This page should include all the details to get you started with your Boundary Devices platform. Where do I get pre-built images? Please refer to the images available for your product in the Wiki: Boundary Devices Wiki For 32-bit platforms…
Linux Kernel
This section will provide all the details about the Boundary Devices Linux kernel. Where is BD Linux kernel source code? Just like most of our source code, it is located on GitHub: https://github.com/boundarydevices/linux-imx6 Note that the master branch README should…
Operating Systems
This section will provide all the details about each Operating System (OS) supported on our platforms. Yocto Here is our latest available Yocto release for i.MX6/7 platforms: Pyro Yocto release Also, a series of posts have been written to get…
QNX for Nitrogen6
QNX for Nitrogen6 (i.MX6) SBC and SOM Here is our “Getting Started” guide to help you start working with the QNX Neutrino OS: QNX Getting Started Guide You can find QNX 7.0 BSP on the QNX developers site:…
U-Boot
// This section will provide all the details about the U-Boot bootloader, from the source code location to the flashing procedure. Where is U-Boot source code? Just like most of our source code, it is located on GitHub: github.com/boundarydevices/u-boot-imx6 Note…