We are pleased to announce a new Yocto release Honister for our Nitrogen8 family of SBCs and SOMs based on i.MX 8 processors. This release includes our latest 5.10 kernel. Below you…
In this post, we would like to show how to add Single/Dual Ethernet to our i.MX8 Boards using the innodisk EMPL-G103/G203 module. which can connect to any of our i.MX8 platforms with…
We are pleased to announce support for the OptConnect ema Smart Embedded Modem on our Nitrogen8M board! We will discuss how to connect the modem via USB to the Nitrogen8M using a…
This post intends to provide all the information you need to understand and use the HAB (High Assurance Boot) on your Boundary Devices Nitrogen8 platform. The goal is also to provide an…
We are pleased to announce that our BD-SDMAC Wifi + BT module is now Bluetooth 5.0 Compatible! We have updated our qcacld-2.0 driver and qca-firmware in order to support this. Our latest…
We are pleased to announce support for the BD_HDMI_MIPI on our i.MX8 based Nitrogen boards. Although the i.MX8M and i.MX8M Mini processors do not natively support HDMI input, the Toshiba TC358743XBG HDMI…
This post intends to answer the question of programming the eMMC memory you can find on our devices. Although there are many different approaches available based on Linux or the MFG Tools, this post…
In this post, we’ll walk through all of the steps needed to configure a specific set of modems under Ubuntu as a reference. We’ll use Quectel EC25 modem in this showcase, if…
Boundary Devices is pleased to announce the official release of our Nitrogen8M_Mini SBC & SOM for the general embedded and IoT markets. As an NXP Early Access Partner we were able to…
The latest addition to our Nitrogen family, the Nitrogen8M, based on the NXP i.MX8MQ processor, will start shipping soon so it is time to show some demos of it. The Setup For…