MIPI DSI to HDMI converter using Lontium Chipset
DB_DSIHD
The DB_8MM_DSIHD daughter board is a MIPI-DSI to HDMI converter to provide HDMI output on our Nitrogen8M MINI and Nitrogen8M platforms. The i.MX8M MINI processor only supports a single MIPI-DSI display output. This daughter board converts MIPI DSI to HDMI to allow customers to develop with an HDMI monitor. It can also be used to provide a 2nd HDMI display output on the i.MX8M based Nitrogen8M board.
*NOTE*: Please make sure you are using our latest kernel revision 4.14
No software listed.
 |
Dual DB9 Serial Cable. |
||
 |
Basler Add-on Camera Kit |
||
 |
Nitrogen8M Plus SOM Evaluation Kit |
||
 |
20 hours of software support, $200/hour |
||
 |
Carrier ENC for Nit8M PLUS SOM Kit |
||
 |
Carrier Board for Nitrogen8M SOM |
||
 |
Carrier Board for Nitrogen8M_Mini SOM |
||
 |
Carrier Board for Nitrogen6X-SOM. Includes 5V PS and SD Card with OS
Also available from Mouser and Avnet. |
||
 |
Pre-Certified 802.11AC WIFI (2.4GHz + 5GHz) + BT5 module based on the Silex SX-SDPAC/Qualcomm Atheros QCA9377 System-on-Chip (SoC). |
||
 |
HDMI input via CSI daughter board
|
||
 |
Cellular Modem + antenna
Please purchase from Mouser:
Purchase on Mouser |
||
 |
7" 1280x800 Display with PCAP Multi-touch. |
||
 |
10.1" 1280x800 IPS Display with PCAP Multi-touch |
||
 |
Expansion Board for Nitrogen8M MINI |
||
 |
Expansion Board for Nitrogen8M |
||
 |
MIPI-DSI to HDMI/LVDS DB |
No posts found.