We are pleased to announce that our BD-SDMAC Wifi + BT module is now Bluetooth 5.0 Compatible! We have updated our qcacld-2.0 driver and qca-firmware in order to support this. Our latest Yocto Zeus images already have this support included….
Using an SSD via mPCIe on our i.MX8 Nitrogen boards
We would like to share some basic instructions for using an SSD via the mPCIe interface on one of our i.MX8 based Nitrogen boards. This has been tested on our Nitrogen8M and Nitrogen8M MINI SBCs. We officially support the…
Using balenaOS with Nitrogen8M Mini
We are pleased to announce a partnership with Balena and provide support for balenaOS on Nitrogen8M Mini. Use this guide to provision balenaOS on the Nitrogen8M Mini successfully. You can also try one of balena’s starter projects via balenaLabs on…
Boundary Devices Launches Wiki Page
We’ve been providing news / tips & tricks via our blog for years. Although it is a great source of information, we have seen some customers get lost or have difficulty finding information. That is why we are glad to…
Safety Critical HMI with CoreAVI
This blog post features two demonstration videos made by CoreAVI that showcase their OpenGL Safety Critical (SC) driver expertise. The demos are using the CoreAVI OpenGL SC driver, which is designed to support real time and safety critical platforms. Both are running on…
Debugging using Segger J-Link JTAG
JTAG is a useful tool that allows customers additional debugging options. Segger was kind enough to send us a J-Link Plus probe for us to test. This blog post will describe how to setup your environment and use the J-Link…
Digital Signage with DisplayIt!Xpress
This blog post will provide some information about DisplayIt!Xpress from BestWave which is a digital signage turnkey solution. This solution is yet another example of what our platforms can offer. It also shows that our partners offer solutions that can provide exactly what…
Timesys Linux for i.MX6
At the end of March, Timesys announced their support of the Nitrogen6X, our latest offering in the Nitrogen series of i.MX single-board computers. Click here to read the press release Click here to watch Maciej’s first webinar on the offering….
U-Boot conventions for i.MX6 (Nitrogen6X and SabreLite)
A little convention make things easy to use, but only if you know the convention. In this blog post, we’ll explain three key environment variable conventions used on the Nitrogen6X (and Sabre Lite before it). For the impatient: Both of…
Revisiting LTIB and Qt on i.MX51 and i.MX53
In a previous post, we walked through the process of building Qt using the LTIB tool, but we were a bit cavalier about the steps involved. Since that time, we’ve been shipping demo software based on LTIB and Qt with…
- 1
- 2
- 3
- …
- 5
- Next Page »
